■ 100% Silicone
■ Ideal for joints of facades, panels of ACM and glazing
■ Excellent adhesion to common building substrates, including aluminum
■ Wide variety of colors
■ Low VOC
■ Resistant to weathering
RTV silicone sealant monolithic alcohol-neutral cure. High performance perimeter seal product with specially developed colors for expansion joints in ACM panels.
It is suitable for bonding and sealing porous and non-porous materials such as concrete, masonry, stone, ceramics, metal, anodized and painted aluminum, glass, polycarbonate, PVC and ACM joints.
Color | Packaging | |
---|---|---|
Corten RAL8016 | Cartridge 280mL | |
Aluminium RAL9006 | Cartridge 280mL | |
Yellow RAL1003 | Cartridge 280mL | |
Orange RAL2009 | Cartridge 280mL | |
Red RAL3020 | Cartridge 280mL | |
Blue RAL5002 | Cartridge 280mL | |
Green RAL6024 | Cartridge 280mL |
Method | Test | Unity | Result |
---|---|---|---|
ME-002 | Skin formation | min | 10 |
ME-013 | Curing rate | mm/24h | 2 |
ASTM D 792 | Density | g/cm3 | 1,01 |
PROPERTY AFTER HEALING | |||
ASTM D 2240 | Durometer Hardness | Shore A | 22 |
ASTM D 412 | Tension at break | MPa | 1,3 |
ASTM D 412 | Elongation at break | % | 400 |
ME-015 | Temperature resistance | °C | -30 / +150 |
ASTM C 719 | Handling capacity | % | 40 |
SURFACE PREPARATION
Surfaces must be firm, level and clean, free of dust and oils. Remove all wastes from materials, especially those that are not tightly adhered to the layers (sand, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. Do not use querosene or gasoline to clean the surfaces. In the case of applications on substrates other than those mentioned, it is recommended to carry out a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE:
Install support body or joint filler and protect substrates with masking tape for better finish. Cut the applicator nozzle at a 45° angle in the desired size and thickness. Apply the sealant to the area and immediately do the finishing with a spatula. After spatulation, remove the adhesive crepe tape. We recommend cleaning the tools before curing the product, because after curing the sealant is only mechanically removed.
■ 100% Silicone
■ Ideal for joints of facades, panels of ACM and glazing
■ Excellent adhesion to common building substrates, including aluminum
■ Wide variety of colors
■ Low VOC
■ Resistant to weathering
■ Do not apply to plastics based on polyethylene, polypropylene, nylon, acrylic and polytetrafluoroethylene.
■ Do not apply to bituminous substrates, natural rubber, EPDM, or construction materials that may exhibit migration of oils, plasticizers or solvents.
■ Do not use on substrates that will have contact with food and continuous immersion in liquid media.
■ Do not apply on joints that may be abraded.
■ Not suitable for aquariums.
■ Do not use on facades as a structural sealant.
■ Does not accept paint.
■ Do not apply to substrates when the surface temperature is above 40°C.
■ It is strongly recommended not to apply the product with full incidence of direct sunlight as it will dry very quickly.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30°C, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.